Tải bản đầy đủ

recovery password (MÔN THIẾT KẾ VÀ CÀI ĐẶT MẠNG)

Password Recovery

Password Recovery Procedure for the
Cisco Catalyst Fixed Configuration
Layer 2 and Layer 3 Switches

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-1


Step−by−Step Procedure
Step 1:
Attach a terminal or PC with terminal emulation (for example,
Hyper Terminal) to the console port of the switch

Step 2:
Unplug the power cable

© 2007 Cisco Systems, Inc. All rights reserved.


ICND1 v1.0—2-2


Step−by−Step Procedure
Step 3:
- Power the switch and bring it to the switch: prompt
- Hold down the mode button located on the left side of the front
panel, while you reconnect the power cable to the switch

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-3


Step−by−Step Procedure
Step 4:
Issue the flash_init command

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-4


Step−by−Step Procedure
Step 5:
Issue the dir flash: command

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-5


Step−by−Step Procedure
Step 6:
Type rename flash:config.text flash:config.old to rename the
configuration file

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-6




Step−by−Step Procedure
Step 7:
Issue the boot command to boot the system

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-7


Step−by−Step Procedure
Step 8:

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-8


Step−by−Step Procedure
Step 9:

Step 10:

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-9


Step−by−Step Procedure
Step 11:

Step 12:

© 2007 Cisco Systems, Inc. All rights reserved.

ICND1 v1.0—2-10



Tài liệu bạn tìm kiếm đã sẵn sàng tải về

Tải bản đầy đủ ngay

×
x