Larsen, O. D. (1993). Ship collision with bridges: the interaction between vessel traffic and
bridge structures, International Association for Bridge and Structural Engineering.
Lee, D. J. and D. J. T. a. p. o. b. a. e. j. f. b. Lee (1994). Bridge bearings and expansion joints.
Lee, G. C. E. and K. C. E. Chang (1995). Proceedings of the international workshop on civil
infrastructure systems: application of intelligent systems and advanced materials on bridge
systems. [np], [nd], NTIS.
Legge, C. (1860). A glance at the Victoria Bridge, and the men who built it, Montreal: J.
Lewis, A. F. G. E. and I. N. E. Guy (1968). Design philosophy and its application to precast
concrete structures: Symposium: Papers, CCA.
Liaghat, D. (1988). Orthotropic bridge deck surfacing: Analysis and design, University of
Libby, J. R. and N. D. Perkins (1976). Modern prestressed concrete highway bridge
superstructures: design principles and construction methods. San Diego, Calif, Grantville
Litzner, H. U. (1981). Effet des contraintes residuelles sur la resistance ultime des poteaux
mixtes, International Association for Bridge and Structural Engineering.
Liu, W. D. (2002). Bridge structure earthquake engineering: Dr Wen David Liu's Memorial
Edition 1952-2001. [Taipei? Liu Family?
Lock, R. J. (2002). Integral bridge abutments, University of Cambridge, Department of
Loo, Y.-C. and A. R. Cusens (1978). The finite-strip method in bridge engineering. Slough,
Cement and Concrete Association.
Low, A. M. and N. J. Ricketts (1993). The assessment of filler beam bridge decks without
transverse reinforcement, Transport Research Laboratory, Ground Engineering Resource
Luton Central, L. and J. Tasker (1977). Automobile engineering: additions to the special
collections of the Luton Central Library, July 1971 to December 1976. Luton (Central
Library, Bridge St., Luton LU1 2NG), Bedfordshire County Library Luton District.
Macclintic, M. C. (1930). Detroit River Bridge-Ambassador Bridge. An engineering record
of the design and construction of the international highway bridge between Detroit, Mich
and Sandwich, Ont, pp. 45. pl. 69. McClintic-Marshall Co.: Pittsburgh.
MacDonald, C. (1867). A discussion of the general principles involved in the construction
and action of the isometrical truss bridge. Philadelphia, T.E. Zell.
Macdonald, C. (1997). Bridging the Strait: the story of the Confederation Bridge project.
Toronto; Oxford, Dundurn Press.
Macdonald, J. H. G. (2000). Identification of the dynamic behaviour of a cable-stayed bridge
from full-scale testing during and after construction, University of Bristol.
Mackay, S. (1993). The Forth Bridge: a picture history. Edinburgh, HMSO.
Madabhushi, S. P. G. (1995). Bridge foundations on liquefiable sand layers, University of
Cambridge, Department of Engineering.
Maharashtra. Commission of inquiry appointed to inquire into the collapse of two prestressed
girders of the flyover bridge under construction near Gloria Church, B. B. (1982). Report of the
Commission of inquiry appointed to inquire into the collapse of two prestressed girders of
the flyover bridge under construction near Gloria Church, Byculla, Bombay. Bombay,
Government Central Press.
Mahmoud, K. M. (2003). Recent developments in bridge engineering: proceedings of the
second New York City bridge conference, 20-21 October 2003, New York, NY, USA. Lisse;
Mallard, H. (1976). Building the Sydney Harbour Bridge: the photography of Henri
Mallard. Melbourne, Sun Books [for] the Australian Centre of Photography.
Mann, F. A. W. (1972). Railway bridge construction: some recent developments. London,
Massachusetts. Cambridge Bridge, C. and W. b. Jackson (1909). Report of the Cambridge
Bridge Commission and report of the chief engineer upon the construction of Cambridge
Bridge. [Boston, Mass.], City of Boston Printing Department.
Mavrocordatus, C. E. (1974). International Conference on Steel Bridge Design and
Construction, Johannesburg, 1974: papers presented. [Pretoria], [Council for Scientific and
McCrea, A. M. (1999). Genetic-based optimisation technique for the development of
automated inspection and restoration systems for bridges, City University.
McLean, J. W. (1980). Science and art of dental ceramics. Vol 2, Bridge design and
laboratory procedures. chicago, Quintessence.
Mekie, D. C. (1971). A room square construction for Howell bridge tornament graphs.
Edinburgh, University of Heriot-Watt.
Mellis, D. B. N. (2003). Mostly from the bridge. Isle of Mull, CCC Design.
Melville, B. (1999). Bridge scour: a compendium of technical papers by researchers at the
University of Auckland. Auckland, Department of Civil and Resource Engineering, University
Melville, B. W. (1984). Scour at bridge sites, University of Auckland School of Engineering.
Merchant, R. W. (1994). Evaluation & performance of elastomeric bridge joint sealants: a
thesis submitted to the Department of Civil & Architectural Engineering and the Graduate
School of The University of Wyoming in partial fulfillment of requirements for the degree
of Master of Science in Civil Engineering. Laramie, Wy., University of Wyoming: 165 leaves.
Merriman, M. (1906). A textbook on roofs and bridges. [S.l.], Wiley.
Merriman, M. and H. S. Jacoby (1894). A text-book on roofs and bridges. New York, Wiley.
Middleton, C. R. and V. Hogg (1998). Review of basic variables for use in the reliability
analysis of concrete highway bridges, University of Cambridge, Department of Engineering.
Mirtalaie, K. (1988). Shear transfer between precast prestressed bridge beams and in-situ
concrete crosshead in continuous structures, University of Leeds.
Mitchell, C. F., J. S. Foster, et al. (1963). Mitchell's advanced building construction, etc.
(Seventeenth edition.), London: B. T. Batsford, 1959.
Mitchell, N. M. (1982). Skew bridge abutements: Theory, experiment and design
recommendations, University of Salford.
Mitgutsch, A. (1985). From cement to bridge. Andover, Philograph.
Moan, T. and M. Shinozuka (1981). Structural safety and reliability: proceedings of
ICOSSAR '81, the 3rd International Conference on Structural Safety and Reliability, The
Norwegian Institute of Technology, Trondheim, Norway, June 23-25, 1981. Amsterdam;
Oxford, Elsevier Scientific.